Saltar al contenido principal

Sostituzione batteria Canon PowerShot SD200

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.

Inglés
Italiano

Traduciendo paso 1

Paso 1
Canon PowerShot SD200 Battery Replacement: paso 0, imagen 1 de 3 Canon PowerShot SD200 Battery Replacement: paso 0, imagen 2 de 3 Canon PowerShot SD200 Battery Replacement: paso 0, imagen 3 de 3
  • The camera used to create these repair guides had a broken lens assembly. As a result, the lens is sticking out in all of the photos, but it is important to note that this should not be the case with your camera. The lens should retract itself back into the camera when it is turned off.

  • Use your fingernail to slide the dark gray tab located on the bottom of the device towards the edge of camera.

  • Slide the light gray door away from the LCD screen and pull up to open the door.

  • Both battery and memory card should now be visible.

La fotocamera usata per creare queste guide di riparazione aveva un gruppo obbiettivo rotto. Di conseguenza, l’obiettivo sporge in tutte le foto, è importante però che questo non dovrebbe essere il caso con la tua fotocamera. L’obiettivo dovrebbe ritrarsi nella fotocamera quando viene spenta.

Usa un'unghia per far scorrere la linguetta grigio scuro situata nella parte bassa del tuo dispositivo verso il bordo della fotocamera.

Fai scorrere lo sportello grigio chiaro allontanandolo dallo schermo LCD e tiralo verso l'alto per aprirlo.

Adesso la batteria e la memory card dovrebbero essere visibili.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.