Saltar al contenido principal

Kobo Clara Colour 電源ボタンボードの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Japonés
Paso 9
Kobo Clara Colour Power Button Board Replacement, Separate the adhesive: paso 0, imagen 1 de 3 Kobo Clara Colour Power Button Board Replacement, Separate the adhesive: paso 0, imagen 2 de 3 Kobo Clara Colour Power Button Board Replacement, Separate the adhesive: paso 0, imagen 3 de 3
Separate the adhesive
  • Insert an arm of pointed tweezers under the edge of the power button board that you separated the coating from.

  • If you're having trouble, reheat the board and try again.

  • Slide the arm along the edge of the board to separate enough adhesive to fit an opening pick under the board.

  • Keep the arm as flat to the frame as possible to avoid scratching the metal.

先の鋭利なピンセットの片側のアームを、コーティングを剥がした電源ボタンボードの端の下に差し込みます。

うまくいかない場合は、基板を温めなおしてやり直してください。

ボードの縁に沿ってアームをスライドさせ、ボードの下にオープニングピックをはめ込むのに十分な接着剤を切り離します。

メタルを傷つけないよう、アームをフレームに対してできるだけ水平に保ってください。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.