Saltar al contenido principal

Kobo Clara Colour 電源ボタンボードの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Japonés
Paso 8
Kobo Clara Colour Power Button Board Replacement, Soften the power button board adhesive: paso 0, imagen 1 de 1
Soften the power button board adhesive
  • The adhesive securing the power button board is strong and requires time and patience to separate properly. Follow the next four steps closely to avoid damaging the power button board.

  • Heat an iOpener and lay it on the power button board for 90 seconds to soften the adhesive.

  • Alternatively, you can use a hair dryer or a heat gun.

電源ボタンボードを固定している接着剤は強力で、適切に切り離すには時間と根気が必要です。電源ボタンボードを破損しないよう、次の4つの手順をよく守ってください。

iOpenerを熱し、電源ボタンボードの上に、約90秒間置いて接着剤を柔らかくします。

ドライヤーやヒートガンを使うこともできます。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.