Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.
Traduciendo paso 3
Paso 3
Mounting screw Pattern & Sliding on the Rail
-
Follow the table for the recommended mounting locations
-
For rails with an odd number of mounting holes, the pattern will overlap in the middle
-
For rails with an even number of mounting holes, the pattern will be continued across the rail
-
Pre-install all the M3x8 SHCS screw and Sliding T-nuts
-
Install the Printed T-nut guide on the end of the X axis extrusion, and slide the rail on to the X-axis from Right to left
-
The guide helps to slide the T-nuts into the extrusion
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.