Saltar al contenido principal

Xbox Series X 中心机箱组件更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.

Inglés
Chino
Paso 4
Xbox Series X Center Chassis Assembly Replacement, Remove the chassis screws: paso 0, imagen 1 de 1
Remove the chassis screws
  • Use a T8 Torx driver to remove the three 7.4 mm screws securing the center chassis assembly to the shell.

使用 T8 Torx 螺丝刀卸下将中央底盘组件固定到外壳上的三个 7.4 毫米螺丝。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.