Saltar al contenido principal

Xbox Series X 中心机箱组件更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.

Inglés
Chino
Paso 5
Xbox Series X Center Chassis Assembly Replacement, Peel up the USB port cable: paso 0, imagen 1 de 2 Xbox Series X Center Chassis Assembly Replacement, Peel up the USB port cable: paso 0, imagen 2 de 2
Peel up the USB port cable
  • Gently peel the taped USB port ribbon cable off of the heatsink.

  • Depending on your model of Xbox, the adhesive may be on the underside of the cable. If so, use an iOpener or hair dryer to heat the cable.

轻轻地将带状 USB 端口带状电缆从散热器上剥离下来。

[title] Peel up the USB port cable
[* black] Gently peel the taped USB port ribbon cable off of the heatsink.
+ [* icon_note] Depending on your model of Xbox, the adhesive may be on the underside of the cable. If so, use an [guide|25705|iOpener|new_window=true] or [guide|157348|hair dryer|new_window=true] to heat the cable.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.