Saltar al contenido principal

iPhone XR ディスプレイアセンブリの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Japonés

Traduciendo paso 1

Paso 1
iPhone XR Display Assembly Replacement, Unscrew the battery connector cover: paso 0, imagen 1 de 2 iPhone XR Display Assembly Replacement, Unscrew the battery connector cover: paso 0, imagen 2 de 2
Unscrew the battery connector cover
  • Remove three 1.2 mm Y000 screws securing the battery connector cover bracket.

  • Remove the bracket.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

  • During reassembly, this is a good point to power on your iPhone and test all functions before you seal the display in place. Be sure to power your iPhone back down completely before you continue working.

バッテリーコネクタのブラケットを固定している1.2 mm Y000ネジを3本外します。

ブラケットを取り出します。

この作業の間、各ネジを保管してください。再組み立ての際には、iPhoneにダメージを与えないよう、正しい位置に装着しているか確認してください。

再組み立ての際には、iPhoneの電源を入れて、ディスプレイを装着する前に全ての機能が反応するかテストをしましょう。作業に戻る前に iPhoneの電源を必ず切ってください。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.