Saltar al contenido principal

iPhone XR ディスプレイアセンブリの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Japonés
Paso 2
iPhone XR Display Assembly Replacement, Disconnect the battery: paso 0, imagen 1 de 2 iPhone XR Display Assembly Replacement, Disconnect the battery: paso 0, imagen 2 de 2
Disconnect the battery
  • Use the point of a spudger to pry the battery connector straight up out of its socket.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

スパッジャーの先端を使って、バッテリーコネクタをソケットからまっすぐ引き抜きます。

この周辺と他のボードコネクションの付近に付けられた黒いシリコン製シールにダメージを与えないようご注意ください。これらのシールは防水防塵機能を守るための特別なプロテクションです。

コネクタをロジックボードから離すように曲げて固定します。アクシデントでロジックボードに接続してしまい、作業中、電源が入らないようにするためです。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.