Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.
Traduciendo paso 5
Paso 5
-
Place the camera backward so that the lens is facing up.
-
Disconnect the ribbon at the bottom of the main board by flipping up the brown ZIF connector and sliding the ribbon out.
-
Remove the right most square connector at the bottom of the camera by flipping up the connector with two fingers until it detaches.
-
Locate and remove the white rubber cover on the microphone.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.