Screen Prerequisite (No LiDAR Assembly Removal)

Última actualización: February 20, 2025

1 - 2 horas

Difícil

Sólo Prerrequisito

Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Introducción

This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.

Kits de reparación

Este kit contiene todas las piezas y herramientas necesarias para completar esta guía.

Partes

Herramientas

Use the pointed end of a spudger to pry up and disconnect the top two display cables.

Grip the right edge of the screen and lift it away.
During reassembly, before installing a display, remove any remaining adhesive from the frame, and clean the glued areas with high-strength (>90%) isopropyl alcohol and a lint-free cloth. This helps prep the iPad for fresh adhesive and ensures that it will bond properly.
If you plan to reinstall your existing screen, remove any remaining adhesive from the back and clean the adhered areas with isopropyl alcohol.
Follow this guide to install pre-cut adhesive strips on your iPad before sealing it up.