/
Mi Mesa de Trabajo

Obtén acceso rápido a guías, piezas y respuestas para tus dispositivos

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unete
Iniciar sesión
Únete a la comunidad de reparación más grande del mundo
Partes
GuíasRespuestas
Traducir
Black and Decker BDEDMT Motor Replacement

Black and Decker BDEDMT Motor Replacement

Tyler Yurina

Tyler Yurina y 5 otros contribuidores

Última actualización: April 20, 2020

15 minuto
Moderado

Introducción

Ir al paso 1

If your device has a faulty motor this is the guide for you. This guide is not very challenging. You may need this guide if your motor has a faulty piece, bad wiring, or failed gears. Replacing the motor can be taken care of in six simple steps.

Qué necesitas

Herramientas

  1. Black and Decker BDEDMT Motor Replacement, Detach Matrix Attachment: paso 1, imagen 1 de 2 Black and Decker BDEDMT Motor Replacement, Detach Matrix Attachment: paso 1, imagen 2 de 2

    • Remember to disconnect the device from all external power sources.

    • To detach the matrix attachment piece, press down on the attachment release button located at the top of the device.

    • Leaving your finger pressed down on the button, simply pull on the attachment to release it.

    Traducir

  2. Black and Decker BDEDMT Motor Replacement, Remove Mounting Hardware: paso 2, imagen 1 de 3 Black and Decker BDEDMT Motor Replacement, Remove Mounting Hardware: paso 2, imagen 2 de 3 Black and Decker BDEDMT Motor Replacement, Remove Mounting Hardware: paso 2, imagen 3 de 3

    • Using a JIS 1 screwdriver, unscrew seven 19mm outer screws located on the armature.

    • Using the same screwdriver, unscrew the 12mm outer screw located on the armature.

    Traducir

  4. Black and Decker BDEDMT Motor Replacement, Motor: paso 3, imagen 1 de 1

    • Gently pull up the motor and other components at the top of the device except the handle.

    • Watch out for the wires. They are connected to two compressed magnets in the black framework.

    Traducir

    Erreur de traduction : ce ne sont pas des aimants, ce sont les balais de collecteurs, appelés aussi charbons.

    Ludovic - Contestar

  5. Black and Decker BDEDMT Motor Replacement: paso 4, imagen 1 de 2 Black and Decker BDEDMT Motor Replacement: paso 4, imagen 2 de 2

    • Slide off the the black framework on the barring side.

    • You may have to compress the magnets in order to slide the framework off of the barring.

    Traducir

  6. Black and Decker BDEDMT Motor Replacement: paso 5, imagen 1 de 2 Black and Decker BDEDMT Motor Replacement: paso 5, imagen 2 de 2

    • Remove the release button attached at the front of the motor.

    • It may have already come off during Step 3.

    Traducir

  7. Black and Decker BDEDMT Motor Replacement: paso 6, imagen 1 de 2 Black and Decker BDEDMT Motor Replacement: paso 6, imagen 2 de 2

    • Work the silver magnetic ring off of the motor through the barring end.

    • The motor is now free.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 5 otros colaboradores

Tyler Yurina

Miembro Desde 02/01/16

419 Reputación

2 Guías creadas

Insignias: 12

+ 9 más insignias

Equipo

UW Tacoma, Team 1-2, Rose Winter 2016 Miembro de UW Tacoma, Team 1-2, Rose Winter 2016

UWT-ROSE-W16S1G2

Miembros de 4

11 Guías creadas

3 comentarios

Hi,

Please can you tell me where to find the motor replacement part for this tool?

Thank you

Renato - Contestar

I have this tool and the attachments and I absolutely love it…but I'm pretty sure the gears are stripped…do you know anything about replacing those?

cwilson0713@gmail.com - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 19

Ultimos 30 días: 66

Todo El Tiempo: 3,191