Saltar al contenido principal
Ayuda

Versión actual por: jayeff

Texto:

Hi @cwimpelberg,
According to this [https://www.partselect.com/PS3506382-Frigidaire-316905209-SERVICE-TECH-SHEET.htm?SourceCode=20&SearchTerm=79092803015&ModelNum=79092803015&ModelID=7197705|supplier] of parts for the range, the manufacturer’s ''tech sheet'' part number is 316905209.
Here’s the [ftp://ftp.electrolux-na.com/prodinfo_pdf/springfield/316905209.pdf|tech sheet]
-It shows how to calibrate and adjust the temperature of the oven but you may also need to measure the [https://www.partselect.com/Models/79092803015/Sections/Body/?ModelID=7198460&ModelNum=79092803015&mfgModelNum=&ManufactureID=4&Selected=1143E0381691C47F55F82E4881CB4C8FC76D0BD8&Position=2&mfg=Frigidaire&Type=Washer&Mark=2|oven probe -part #37 body diagram] (temperature sensor) resistance at the test points on the display pcb with an Ohmmeter and compare them against the temperatures in the chart in the tech sheet to see if it is OK or not
+It shows how to calibrate and adjust the temperature of the oven but you may also need to measure the [https://www.partselect.com/Models/79092803015/Sections/Body/?ModelID=7198460&ModelNum=79092803015&mfgModelNum=&ManufactureID=4&Selected=1143E0381691C47F55F82E4881CB4C8FC76D0BD8&Position=2&mfg=Frigidaire&Type=Washer&Mark=2|oven probe -part #37 body diagram] (temperature sensor) resistance values at the test points on the display pcb with an Ohmmeter and compare them against the temperatures in the chart in the tech sheet to see if it is OK or not

Estatus:

open

Aporte original por: jayeff

Texto:

Hi @cwimpelberg,

According to this [https://www.partselect.com/PS3506382-Frigidaire-316905209-SERVICE-TECH-SHEET.htm?SourceCode=20&SearchTerm=79092803015&ModelNum=79092803015&ModelID=7197705|supplier] of parts for the range, the manufacturer’s ''tech sheet'' part number is 316905209.

Here’s the [ftp://ftp.electrolux-na.com/prodinfo_pdf/springfield/316905209.pdf|tech sheet]

It shows how to calibrate and adjust the temperature of the oven but you may also need to measure the [https://www.partselect.com/Models/79092803015/Sections/Body/?ModelID=7198460&ModelNum=79092803015&mfgModelNum=&ManufactureID=4&Selected=1143E0381691C47F55F82E4881CB4C8FC76D0BD8&Position=2&mfg=Frigidaire&Type=Washer&Mark=2|oven probe -part #37 body diagram] (temperature sensor) resistance at the test points on the display pcb with an Ohmmeter and compare them against the temperatures in the chart in the tech sheet to see if it is OK or not

Estatus:

open