Saltar al contenido principal

Aviso: Estás editando un prerrequisito para la guía que estabas viendo hace poco. Cualquier cambio que realices afectará todas las 2 guías que incluyan este paso.

Inglés
Español

Traduciendo paso 5

Paso 5
Once all of the adhesive is freed from under the logic board/battery assembly, lift the assembly up from the side and carefully rotate it over to access the underside of the battery. The logic board is still attached to the rear case. Do not try to completely separate the assembly, or you will rip this ribbon cable. The logic board is still attached to the rear case. Do not try to completely separate the assembly, or you will rip this ribbon cable.
  • Once all of the adhesive is freed from under the logic board/battery assembly, lift the assembly up from the side and carefully rotate it over to access the underside of the battery.

  • The logic board is still attached to the rear case. Do not try to completely separate the assembly, or you will rip this ribbon cable.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.