Saltar al contenido principal

任天堂 New 2DS XL 电池更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 7 guías que incluyen este paso.

Inglés
Chino
Paso 3
New Nintendo 2DS XL Battery Replacement, Case Separation: paso 0, imagen 1 de 2 New Nintendo 2DS XL Battery Replacement, Case Separation: paso 0, imagen 2 de 2
Case Separation
  • Be careful when separating the bottom panel from the front casing to avoid breaking the three cables connected to the motherboard (two on each side and one in the rear).

  • Using a spudger, separate the back panel from the front casing by gently prying around the panel.

  • There are many clips along the hinge of the case, so it is recommended to work your way along one short side and the two long sides before finishing the last short side.

将底板与前壳分离时要小心,以免弄断与主板相连的三条电缆(两侧各两条,后面一条)。

用撬棒轻轻撬动后面板,将其与前壳分离。

外壳的铰链上有很多夹子,因此建议在完成最后一个短边之前先沿着一个短边和两个长边进行操作。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.