/
Mi Mesa de Trabajo

Obtén acceso rápido a guías, piezas y respuestas para tus dispositivos

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unete
Iniciar sesión

LG G3 Bildschirm flackert und verblasst

Información de Guía

= Hecho = Incompleto
Inglés
Alemán
    1* Take# Remove the battery out.

    2*Unscrew# Unfasten all screws and remove the whole backplastic cover.

    3*# You will see a connector down atconnectors next to the chargercharging port take. Disconnect them off and you can blow some air to take the dirt off.

    4*# Take some paper and fold it 4 to 6 times (small one).

    5*# After folding it make sure it is the size of the connector that is next to the Camera.

    6*# Place the foldenfolded paper on top of the connector.

    7*# Slowly get back all the plastic covers.

    8*Screw# Put all screws back in all the screwsand fasten them.

    9*# Place the battery, SD Card and the Sim back.

    10*# Power on the Phone.
    99.9% It will work.
    UPDATE:
    If you want to take it a step further,

     get some thermal paste

     and remove the whole circuit board and put some on the spot (as shown in the picture) do NOT put too much a dot will be enough...
    after that, you can go ahead and place the circuit board back in place, then place the paper on the connector(follow the steps 6-10)
    *Even thermal pad might do the job.
    Thanks,
    I hope this will fix the problem !

      Pasos de la guía

      Paso 1 — Platziere das gefaltete Papier hier!

      Platziere das Papier hier auf diesen Anschluss!

      Paso 2 — Wärmeleitpaste

      Ein kleiner Punkt mit Wärmeleitpaste bringt mehr als eine größere Menge!

      Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.