Mi Mesa de Trabajo

Obtén acceso rápido a guías, piezas y respuestas para tus dispositivos

Iniciar sesión

PowerBook G4 Aluminum 15" 1.67 GHz Logic Board Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.

Volver a la Guía

Inglés

Español

Paso anterior Siguiente paso

Traduciendo paso 6

Paso 6

PowerBook G4 Aluminum 15" 1.67 GHz Logic Board Replacement: paso 0, imagen 1 de 1

Very gently lift up the left side of the logic board.
If the logic board does not immediately come free, it may be necessary to soften the thermal paste between the logic board and heat sink. You can soften the thermal compound using a hairdryer. Move the hairdryer back and forth between the two fans about one inch above the logic board for one minute. At this point, the logic board should now come free easily.
Lift the left edge of the board up to approximately a 30 degree angle (if you don't have your protractor handy, just lift until the DVI port clears the right hinge).
Once the logic board clears the ports, slide it out to the left.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.