Saltar al contenido principal

Reemplazo de la junta de la válvula de descarga del retrete

Inglés
Español
Paso 2
Toilet Flush Valve Seal Replacement: paso 0, imagen 1 de 1
  • Remove the top of the toilet tank.

  • With a towel nearby, roll-up your sleeves. Flush the toilet to lower the tank water level.

  • Immediately identify the old, worn [red] Valve Seal at bottom of the vertical assembly of Overflow Tube and Float.

  • Reach into water tank and remove the worn valve seal by pulling it, like an old rubber band, with your finger tips (or pliers) until it breaks.

Quita la tapa de la cisterna.

Con una toalla cerca, remángate. Tira de la cadena para rebajar el nivel de agua en la cisterna.

Inmediatamente identifica la junta (roja) vieja y gastada al fondo del conjunto vertical del tubo de desbordamiento y la boya.

Mete la mano en el tanque y quita la junta vieja tirando de ella, como una goma vieja, con la punta de tus dedos o unos alicates hasta que se rompa.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.