Saltar al contenido principal

Remplacement de l'écran LCD du Canon PowerShot A200

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Francés
Paso 11
Canon PowerShot A200 LCD Display Replacement: paso 0, imagen 1 de 2 Canon PowerShot A200 LCD Display Replacement: paso 0, imagen 2 de 2
  • On the opposite side of the camera, use the Phillips head screwdriver, turning clockwise, to fasten two screws under the rubber cover.

  • Once both screws are in place, put the rubber cover back in place.

Sur le côté opposé de l'appareil photo, utilisez le tournevis cruciforme, dans le sens horaire, pour fixer deux vis sous le couvercle en caoutchouc.

Une fois les deux vis en place, remettez le couvercle en caoutchouc en place.

-[* black] On the opposite side of the camera, use the'' Phillips head screwdriver'', turning clockwise, to fasten two screws under the rubber cover.
+[* black] On the opposite side of the camera, use the ***Phillips head screwdriver,*** turning clockwise, to fasten two screws under the rubber cover.
[* black] Once both screws are in place, put the rubber cover back in place.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.