Traduciendo paso 1
Paso 1
-
Use the Phillips #00 screwdriver to remove the seven screws holding the camera body to the case.
-
Pull out the camera body from the camera casing.
-
Use the metal tweezers to unplug the orange connector.
| - | [* black] Follow the instructions in the prerequisite guide Disassembling the Canon PowerShot A200 Case. |
|---|---|
| - | [* black] Use the ''Phillips screwdriver'' to unscrew the 7 screws that hold the camera body to the camera case. The location of the screws are noted in the photo. Set the screws aside. |
| - | [* black] Pull out the camera body from the outside camera casing. |
| - | [* black] Use the ''metal tweezers'' to unplug the connector from the other side of the camera case. |
| + | [* red] Use the Phillips #00 screwdriver to remove the seven screws holding the camera body to the case. |
| + | [* black] Pull out the camera body from the camera casing. |
| + | [* orange] Use the metal [product|IF145-020|tweezers] to unplug the orange connector. |
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.