Saltar al contenido principal

Samsung Galaxy S6 Display ersetzen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés
Alemán
Paso 3
Samsung Galaxy S6 Screen Replacement: paso 0, imagen 1 de 2 Samsung Galaxy S6 Screen Replacement: paso 0, imagen 2 de 2
  • Slide the pick down the edge of the display to separate the adhesive underneath.

  • Stop cutting when you get to the daughterboard to avoid the delicate capacitive button under the display.

  • If cutting becomes difficult at any point, reheat and reapply the iOpener.

  • After cutting the adhesive, leave the pick in the side of the display to prevent the display from re-adhering to the frame.

Schiebe das Plektrum an der Displaykante nach unten um die Klebeverbindung darunter aufzutrennen.

Halte vor der Tochterplatine an, um die empfindliche kapazitive Taste unter dem Display zu umgehen.

Wenn das Auftrennen schwergängig wird, dann erwärme den iOpener und lege ihn wieder auf.

Lasse nach dem Auftrennen das Plektrum in der Displayseite stecken, damit das Display nicht wieder am Rahmen festklebt.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.