Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.
Traduciendo paso 8
Paso 8
-
Use the flat end of the spudger to peel back the orange ribbon cable on the top of the camera where the power button contact is located. Only apply enough force to lift the power button contact up from the rest of the camera.
-
Use the flat end of the spudger to lift up the LED bulb from the rest of the camera.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.