/
Mi Mesa de Trabajo

Obtén acceso rápido a guías, piezas y respuestas para tus dispositivos

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unete
Iniciar sesión

Canon Powershot A720 IS LCD Screen Replacement

Volver a la Guía
Inglés
Español
Paso 6
Canon Powershot A720 IS LCD Screen Replacement, Removing the LCD Screen from the Motherboard: paso 0, imagen 1 de 3 Canon Powershot A720 IS LCD Screen Replacement, Removing the LCD Screen from the Motherboard: paso 0, imagen 2 de 3 Canon Powershot A720 IS LCD Screen Replacement, Removing the LCD Screen from the Motherboard: paso 0, imagen 3 de 3
Removing the LCD Screen from the Motherboard

  • Carefully lift and turn over the LCD screen so that you are able to see the motherboard.

  • Potential for device damage: Treat the motherboard with care since it is very sensitive to static discharge.

  • Carefully disconnect the LCD screen ribbon cable from its ZIF connector with your thumb and index finger.

  • Have your thumb and index finger cover as much of the ribbon's width and keep as close to the ZIF connector as possible without touching the motherboard, while pulling the ribbon cable out.

  • Potential for device damage: Be careful to not rip the ribbon wire when pulling it out.

  • Use the soldering iron to separate the black and red power wires from the motherboard.

  • Note the location of where each wire was attached. The black wire is the negative power wire and the red wire is the positive power wire. Replacing them incorrectly could lead to power outages and damage to the motherboard.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.