Saltar al contenido principal

Kobo Clara Colour Power-Button Platine tauschen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Alemán
Paso 8
Kobo Clara Colour Power Button Board Replacement, Soften the power button board adhesive: paso 0, imagen 1 de 1
Soften the power button board adhesive
  • The adhesive securing the power button board is strong and requires time and patience to separate properly. Follow the next four steps closely to avoid damaging the power button board.

  • Heat an iOpener and lay it on the power button board for 90 seconds to soften the adhesive.

  • Alternatively, you can use a hair dryer or a heat gun.

Der Kleber, mit dem die Power-Button-Platine befestigt ist, ist sehr stark und erfordert Zeit und Geduld, um sich richtig zu lösen. Befolge die folgenden vier Schritte genau, damit die Power-Button-Platine nicht beschädigt wird.

Lege einen erwärmten iOpener 90 Sekunden lang auf die Power-Button Platine , um die Beschichtung aufzuweichen.

Alternativ kannst du auch einen Fön oder ein Heißluftgebläse verwenden.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.