Saltar al contenido principal

Kobo Clara Colour Vervanging van de printplaat van de aan-uitknop

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Holandés
Paso 4
Kobo Clara Colour Power Button Board Replacement, Soften the power button board adhesive: paso 0, imagen 1 de 1
Soften the power button board adhesive
  • Heat an iOpener and lay it on the power button board for 90 seconds to soften the coating.

  • Alternatively, you can use a hair dryer or a heat gun.

Verwarm een iOpener en leg deze gedurende 90 seconden op de printplaat van de aan-uitknop om de coating te verzachten.

Je kunt hiervoor ook een föhn of een heteluchtpistool gebruiken.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.