/
Mi Mesa de Trabajo

Obtén acceso rápido a guías, piezas y respuestas para tus dispositivos

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unete
Iniciar sesión

Scollegamento scheda madre

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Volver a la Guía
Inglés
Italiano
Paso 2
Motherboard Disconnection, Remove the coating: paso 0, imagen 1 de 3 Motherboard Disconnection, Remove the coating: paso 0, imagen 2 de 3 Motherboard Disconnection, Remove the coating: paso 0, imagen 3 de 3
Remove the coating

  • Use the tip of a spudger to scrape the coating along the ZIF connectors' black locking tabs—enough so you can grab clumps of it with pointed tweezers.

  • Use pointed tweezers to peel off the coating around the black locking tabs and their hinges on the ZIF connector.

  • If the coating becomes too brittle and hard to peel off, reheat the connectors and try again.

  • This is a meticulous process! Failure to remove enough of the coating could damage the locking tab during disconnection, so take your time!

Rimuovi il rivestimento

Usa la punta di uno spudger per grattar via il rivestimento lungo le linguette di bloccaggio nere dei connettori ZIF, abbastanza da poter afferrarne dei pezzi con delle pinzette a punta.

Usa delle pinzette a punta per rimuovere il rivestimento intorno alle linguette di bloccaggio nere e le loro cerniere sul connettore ZIF.

Se il rivestimento diventa troppo friabile e difficile da rimuovere, scalda di nuovo i connettori e riprova.

Questo è un processo meticoloso! Non riuscire a rimuovere abbastanza rivestimento potrebbe danneggiare la linguetta di bloccaggio durante la sconnessione, quindi non avere fretta!

[title] Remove the coating
-[* black] Use the tip of a spudger to scrape the coating along the ZIF connectors' black locking tabs—enough so you can grab clumps of it with pointed [product|IF145-020|tweezers].
+[* black] Use the tip of a spudger to scrape the coating along the ZIF connectors' black locking tabs—enough so you can grab clumps of it with [product|IF145-020-2|pointed tweezers].
[* black] Use pointed tweezers to peel off the coating around the black locking tabs and their hinges on the ZIF connector.
[* icon_note] If the coating becomes too brittle and hard to peel off, reheat the connectors and try again.
[* icon_caution] This is a meticulous process! Failure to remove enough of the coating could damage the locking tab during disconnection, so take your time!

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.