Saltar al contenido principal

Kobo Libra Colour Power-Button Platine tauschen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Alemán
Paso 7
Kobo Libra Colour Power Button Board Replacement, Soften the motherboard coating: paso 0, imagen 1 de 2 Kobo Libra Colour Power Button Board Replacement, Soften the motherboard coating: paso 0, imagen 2 de 2
Soften the motherboard coating
  • If you aren't replacing the white interconnect cable skip to this step.

  • Apply a heated iOpener to the interconnect cable's ZIF connector on the motherboard for 90 seconds to soften the coating.

  • Alternatively, you can use a hair dryer or a heat gun for 30 seconds.

Wenn du das weiße Verbindungskabel nicht austauschst, kannst du diesen Schritt überspringen.

Lege einen erwärmten iOpener 90 Sekunden lang auf den ZIF-Stecker des Verbindungskabels auf dem Motherboard, um die Beschichtung aufzuweichen.

Alternativ kannst du auch 30 Sekunden lang einen Fön oder ein Heißluftgebläse verwenden.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.