Saltar al contenido principal

iPad Pro 12.9インチ 第3世代 バッテリーの交換

Inglés
Japonés
Paso 2
iPad Pro 12.9" 3rd Gen Battery Replacement: paso 0, imagen 1 de 3 iPad Pro 12.9" 3rd Gen Battery Replacement: paso 0, imagen 2 de 3 iPad Pro 12.9" 3rd Gen Battery Replacement: paso 0, imagen 3 de 3
  • Pull the strip out slowly and steadily at a low angle. Give it plenty of time to stretch and un-stick from under the battery.

  • If the adhesive strip breaks off, try to retrieve it using your fingers or blunt nose tweezers, and continue pulling—but don't pry under the battery.

  • If you removed all of the stretch-release adhesive, skip to this step. Otherwise, follow the next two steps for each battery cell with remaining adhesive.

ストリップを低い角度でゆっくりと引き抜きます。接着ストリップが伸びてバッテリーの下から外れるまで、ゆっくりと時間をかけてください。

接着ストリップが切れてしまった場合は、指や先端が鋭利でないピンセットを使ってストリップを取り出し、引き続けますが、バッテリーの下をこじ開けないようにしてください。

ストレッチリリースタイプの接着剤をすべて剥がしたら、この手順はスキップしてください。そうでない場合は、接着剤が残っている各バッテリーセルについて、次の2つの手順に従ってください。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.