Saltar al contenido principal

Procedura di apertura

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 73 guías que incluyen este paso.

Inglés
Italiano
Paso 24
Opening Procedure: paso 0, imagen 1 de 2 Opening Procedure: paso 0, imagen 2 de 2
  • Be very careful with this step. Take your time, ensure the adhesive is hot and soft, and make sure you separated all of the adhesive with a pick. Don't be afraid to stop and reheat.

  • Twist the two opening picks on the left corners of the iPad to lift the digitizer slightly, separating the the last of the adhesive in the process.

  • If there's a significant amount of resistance, reheat the edges and work along them with an opening pick.

Fai molta attenzione durante questo passo. Prenditi tempo, accertati che l'adesivo sia caldo e morbido e separato completamente con i plettri. Non esitare a fermarti e scaldare di nuovo.

Torci i due plettri di apertura degli angoli a sinistra dell'iPad per sollevare leggermente il digitizer, separando l'adesivo rimanente.

Se senti molta resistenza, scalda di nuovo i bordi e lavoraci con un plettro di apertura.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.