Saltar al contenido principal

Procedura di apertura

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 73 guías que incluyen este paso.

Inglés
Italiano
Paso 21
Opening Procedure: paso 0, imagen 1 de 3 Opening Procedure: paso 0, imagen 2 de 3 Opening Procedure: paso 0, imagen 3 de 3
  • Insert an opening pick into the gap you just created.

  • Slide the pick underneath the home button and towards the bottom-right corner, making sure only the tip is between the digitizer and the frame.

  • Only insert the pick up to 1 mm to avoid damaging the right antenna.

Inserisci un plettro di apertura nella fessura che hai appena creato.

Fai scorrere il plettro sotto il tasto home e verso l'angolo in basso a destra, accertandoti che solo la punta si trova tra digitizer e telaio.

Inserisci il plettro di solo 1 mm per evitare di danneggiare l'antenna destra.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.