Saltar al contenido principal

iPad 7 LCDの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 12 guías que incluyen este paso.

Inglés
Japonés
Paso 2
iPad 7 LCD Replacement, Flip the LCD over: paso 0, imagen 1 de 3 iPad 7 LCD Replacement, Flip the LCD over: paso 0, imagen 2 de 3 iPad 7 LCD Replacement, Flip the LCD over: paso 0, imagen 3 de 3
Flip the LCD over
  • Don't attempt to fully remove the LCD during this step, as it's still connected by several cables at the home button end.

  • Only lift the LCD from the front-facing camera end.

  • Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers.

  • Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the frame.

  • Lay the LCD down onto a clean, soft, lint-free surface to allow access to the display cables.

LCDはホームボタンの端に数本のケーブルで接続されているため、この手順で完全に取り外さないでください。

LCDはフロントカメラ側からのみ持ち上げてください。

スパッジャーの平面側を使って、LCDを指でつかめる程度まで凹みからこじ開けます。

iPadの液晶を本のページをめくるように、カメラの近くで持ち上げて、フレームのホームボタン端に重ねます。

LCDを清潔で柔らかく、糸くずの出ない面に置き、ディスプレイケーブルにアクセスできるようにします。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.