Saltar al contenido principal

Procédure d'ouverture et déconnexion de la batterie

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.

Inglés
Francés
Paso 6
Opening Procedure and Battery Disconnect, Cut through the screen adhesive: paso 0, imagen 1 de 2 Opening Procedure and Battery Disconnect, Cut through the screen adhesive: paso 0, imagen 2 de 2
Cut through the screen adhesive
  • Slide the pick down the right edge of the Surface to slice through the adhesive under the screen.

  • Throughout the rest of the procedure, if you encounter significant resistance while sliding the pick, stop and reheat the section you're working on. Applying too much pressure with the pick can crack the glass.

  • Leave this opening pick in the right edge to prevent the adhesive from resealing.

Faites glisser le médiator le long du bord droit de la Surface pour couper l'adhésif sous l'écran.

Pendant le reste de la procédure, si vous rencontrez une résistance significative en faisant glisser le médiator, arrêtez-vous et refaites chauffer la section sur laquelle vous travaillez. Trop forcer sur le médiator peut briser le verre.

Laissez ce médiator dans le bord droit pour empêcher l'adhésif de recoller.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.