Saltar al contenido principal

Xbox Series X 中央筐体アセンブリ

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 17 guías que incluyen este paso.

Inglés
Japonés
Paso 4
Xbox Series X Center Chassis Assembly Replacement, Remove the chassis screws: paso 0, imagen 1 de 1
Remove the chassis screws
  • Use a T8 Torx driver to remove the three 7.4 mm screws securing the center chassis assembly to the shell.

T8トルクスドライバーを使って、中央の筐体アセンブリを本体に固定している7.4mmネジを3本外します。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.