Traduciendo paso 3
Paso 3
-
Place the camera on its back with the lens facing upwards as shown in the image
-
Remove the additional 1.5 mm Phillip #1 screw from underneath the lens cover
-
Remove the screw by turning the Philip driver counterclockwise.
-
By removing the screw, you will be able to remove the cover lens.
| - | [* black] Remove the lens cover. |
|---|---|
| - | [* black] Remove the additional 1.5 mm Phillips #1 screws from underneath the lens cover. |
| + | [* black] Place the camera on its back with the lens facing upwards as shown in the image |
| + | [* black] Remove the additional 1.5 mm Phillip #1 screw from underneath the lens cover |
| + | [* black] Remove the screw by turning the Philip driver counterclockwise. |
| + | [* black] By removing the screw, you will be able to remove the cover lens. |
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.