Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 11 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
Use your T5 Torx driver to remove all eight 3.2 mm screws holding down the back panel.
-
Wedge an opening pick between the back cover and the base of the board, then slightly lift the tool to pop the clips on the back cover off.
[* icon_caution] For your safety, please make sure the device is powered off and the A/C adapter is unplugged. | |
- | [* red] Use your T5 Torx driver to remove all eight 3. |
+ | [* red] Use your T5 Torx driver to remove all eight 3.2 mm screws holding down the back panel. |
[* black] Wedge an opening pick between the back cover and the base of the board, then slightly lift the tool to pop the clips on the back cover off. |
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.