Saltar al contenido principal

iPad Mini CDMA LCD Austausch

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 42 guías que incluyen este paso.

Inglés
Alemán
Paso 11
iPad Mini CDMA LCD Assembly Replacement: paso 0, imagen 1 de 3 iPad Mini CDMA LCD Assembly Replacement: paso 0, imagen 2 de 3 iPad Mini CDMA LCD Assembly Replacement: paso 0, imagen 3 de 3
  • Starting at the top right of the device, slide the spudger in between the LCD frame and metal backing plate, which will separate the adhesive as you push.

  • The goal is to separate the adhesive, not to pry the LCD up, so keep the pointed tip of the spudger as low as possible to prevent bending the LCD.

  • If inserting the spudger causes the corner of the LCD to bend up, repeat the steps with the guitar pick to further loosen the adhesive.

Fange rechts oben am Gerät an, schiebe den Spudger zwischen LCD Rahmen und Metallplatte, dabei wird sich die Klebeverbindung lösen.

Das Ziel ist das Lösen der Verbindung, nicht das LCD hochzuhebeln. Halte deswegen die Spudgerspitze so flach wie möglich, um das LCD nicht zu verbiegen.

Wenn sich beim Einführen des Spudgers die Ecke des LCD nach oben verbiegt, musst du die Schritte mit dem Gitarrenplektrum noch ein Mal wiederholen, um die Klebeverbindung weiter zu trennen.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.