Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 42 guías que incluyen este paso.

Inglés
Alemán
Paso 10
In the next few steps, you'll be sliding a spudger between the LCD and the metal backing plate to fully separate the LCD from the adhesive beneath. Insert the flat end of a spudger between the LCD frame and the metal backing plate. Be sure to get the spudger between the LCD frame and backing plate, and not beneath the plate. Prying up on the plate will damage it, because it is screwed down to the rear case beneath the LCD.
  • In the next few steps, you'll be sliding a spudger between the LCD and the metal backing plate to fully separate the LCD from the adhesive beneath.

  • Insert the flat end of a spudger between the LCD frame and the metal backing plate.

  • Be sure to get the spudger between the LCD frame and backing plate, and not beneath the plate. Prying up on the plate will damage it, because it is screwed down to the rear case beneath the LCD.

In den nächsten Schritten wirst du einen Spudger zwischen LCD und der Metallplatte dahinter schieben, um das LCD vom Kleber darunter abzulösen.

Setze das flache Ende des Spudgers zwischen LCD Rahmen und der Metallplatte dahinter.

Sei sicher, dass der Spudger zwischen LCD Rahmen und der Metallplatte sitzt und nicht unter der Metallplatte. Wenn du die Platte hochhebelst, beschädigst du sie, weil sie unter dem LCD am rückseitigen Gehäuse verschraubt ist.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.