Saltar al contenido principal

iPad Mini CDMA Front Panel Austausch

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 42 guías que incluyen este paso.

Inglés
Alemán
Paso 13
iPad Mini CDMA Front Panel Replacement: paso 0, imagen 1 de 3 iPad Mini CDMA Front Panel Replacement: paso 0, imagen 2 de 3 iPad Mini CDMA Front Panel Replacement: paso 0, imagen 3 de 3
  • Leave the opening pick in the iPad slightly past the front-facing camera.

  • Take a second pick and insert it to the left of the camera, where the first pick just was. Slide it back to the corner to completely cut any remaining adhesive.

  • Leave the second pick in place to prevent the corner adhesive from re-sealing as it cools.

Lasse das Plektrum kurz nach der Frontkamera stehen.

Setze ein zweites Plektrum links von der Kamera ein, an die Stelle wo das erste Plektrum sich gerade befunden hat. Schiebe es zur Ecke zurück, um alle Klebereste zu lösen.

Lasse das zweite Plektrum stehen, um so zu vermeiden, dass die linke Ecke wieder verklebt, wenn sie sich abkühlt.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.