Saltar al contenido principal

iPad Mini CDMA Front Panel Austausch

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 42 guías que incluyen este paso.

Inglés
Alemán
Paso 8
iPad Mini CDMA Front Panel Replacement: paso 0, imagen 1 de 3 iPad Mini CDMA Front Panel Replacement: paso 0, imagen 2 de 3 iPad Mini CDMA Front Panel Replacement: paso 0, imagen 3 de 3
  • Take the first pick you inserted and slide it up toward the top corner of the iPad.

  • If you can see the tip of the opening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this as it may deposit adhesive on the front of the LCD that is difficult to clean off.

Nimm das erste Plektrum an und schiebe es am iPad nach oben.

Erschrick nicht, wenn du die Spitze des Plektrums durch die Glasscheibe sehen kannst, ziehe das Plektrum nur ein Stückchen zurück. Meistens ist alles in Ordnung, versuche trotzdem das zu vermeiden, es könnte nämlich etwas Kleber direkt auf das LCD kommen und das ist schwierig zu entfernen.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.