Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.
Traduciendo paso 2
Paso 2
-
Reorient the camera so that you are looking at the front.
-
Remove the 2.8 mm screw right above the screw holding the lens on using a Phillips #00 screwdriver.
-
Remove the 3.3 mm black screw to the left of the front viewfinder using a Phillips #000 screwdriver.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.