Saltar al contenido principal

Canon PowerShot SD850 IS Flash Unit Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 5

Paso 5
Canon PowerShot SD850 IS Flash Unit Replacement: paso 0, imagen 1 de 1
  • Gently remove the flash component from the rest of the camera.

  • Use a spudger or a flathead screwdriver and carefully pry off the plastic piece on top of the flash unit.

  • The flash unit can now be removed and replaced.

  • Be careful not to touch the capacitor attached to the flash unit as it may still be holding a charge!

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.