Saltar al contenido principal

Canon PowerShot SD200 Buttons Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 1

Paso 1
Canon PowerShot SD200 Buttons Replacement: paso 0, imagen 1 de 3 Canon PowerShot SD200 Buttons Replacement: paso 0, imagen 2 de 3 Canon PowerShot SD200 Buttons Replacement: paso 0, imagen 3 de 3
  • Close the light gray battery compartment door.

  • Remove the six 2.8 mm Phillips screws on the outside of the case. Two screws are found on each side of the camera, and the final two are found on the bottom.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.