Saltar al contenido principal

Disassembling Canon PowerShot SX200 IS

Inglés
Español
Paso 2
Disassembling Canon PowerShot SX200 IS: paso 0, imagen 1 de 2 Disassembling Canon PowerShot SX200 IS: paso 0, imagen 2 de 2
  • Remove a black screw from under that battery compartment cover.

  • Remove two silver screws from under the A/V connector cover.

  • Remove the silver right hand end.

  • Remove the case back.

  • (On reassembly, just before replacing the rear cover is a great time to clean the fingermarks off the LCD and the inside of the rear cover window.)

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.