Saltar al contenido principal

Reemplazo del LCD del iPad 7

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 12 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 1

Paso 1
iPad 7 LCD Replacement, Remove the LCD: paso 0, imagen 1 de 2 iPad 7 LCD Replacement, Remove the LCD: paso 0, imagen 2 de 2
Remove the LCD
  • Use a Phillips screwdriver to remove the four 4.3 mm-long screws securing the LCD to the frame.

  • Remove any tape obscuring the LCD screws.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

Usa un destornillador Phillips para remover los cuatro tornillos de 4.3 mm que aseguran el LCD al marco.

Quita cualquier cinta que oscurezca los tornillos.

Durante esta reparación, mantente al tanto de cada tornillo y asegúrate de volver a colocarlo exactamente donde estaba para evitar dañar tu dispositivo.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.