Saltar al contenido principal

Canon PowerShot SX60 HS Top Cover Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 2

Paso 2
Canon PowerShot SX60 HS Top Cover Replacement: paso 0, imagen 1 de 3 Canon PowerShot SX60 HS Top Cover Replacement: paso 0, imagen 2 de 3 Canon PowerShot SX60 HS Top Cover Replacement: paso 0, imagen 3 de 3
  • Use the black spudger to unclip the ribbon on the top right corner and then remove it using the nylon tipped tweezers.

  • Remove one silver 2mm #00 Philips screw found underneath the ribbon.

  • Once the screw is removed, the top panel is completely detached from the device. To remove it, grab it by hand and gently pull it off the device.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.