Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
Use the Phillips #00 screwdriver to remove the two 2mm #00 silver screws located under the viewfinder.
-
Remove the plastic housing around the viewfinder by using a black spudger or opening tool to unclip the 3 plastic clips on the sides of the viewfinder.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.