Saltar al contenido principal

Cambios al paso #1

Editado por Brianna Hitchcock

Edicion aprobada por Brianna Hitchcock

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Disconnect the 6 wires that are attached to the motherboard.
+[* icon_note] If you noticed some of the parts removed in previous steps continuing to be in the later photos, it is because you can perform the previous removals in any order.
+ [* black] Disconnect the 6 wires that are attached to the motherboard.
[* red] Three of the six wires have a clasp holding the wire. Pull up on the tab and remove the wire.
[* orange] The other three wires have pull tabs and can be removed by pulling from the connector of the wire.