Cambios al paso #1
Editado por Brianna Hitchcock —
Edicion aprobada por Brianna Hitchcock
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] On the motherboard, make sure every wire that is connected is removed. There are 6 wires attached. Make sure to use the proper methods when removing the wires. |
|---|---|
| - | [* black] Three of the six wires have a clasp holding the wire. Pull up on the tab and remove the wire. |
| - | [* black] The other three wires have pull tabs and can be removed by pulling from the connector of the wire. |
| - | [* black] Unscrew six (6), 3.5 millimeter Philips Head 00 screws. |
| + | [* black] Disconnect the 6 wires that are attached to the motherboard. |
| + | [* red] Three of the six wires have a clasp holding the wire. Pull up on the tab and remove the wire. |
| + | [* blue] The other three wires have pull tabs and can be removed by pulling from the connector of the wire. |
| [* black] Gently lift the motherboard out of the laptop. |