|
Introduction |
This repair is for an Atari Flashback 6 controller. Over time and strenuous use, controller wiring can wear down and disconnect from the terminals. In this guide, we will be disassembling our Atari Flashback 6 controllerdisassemble, re-solderingsolder the wires back ontoto the terminal, and then reassembling the controllerreassemble. There are 9 steps in total, andYou can achieve all can be achievednine steps with little to no experience, as long as you have the right tools. However, caution should always be exercised when handlingHandle tools likesuch as a soldering iron and exacto knife with care to avoidprevent injury or controller damage to the controller.[br] | | [br] | [linkguide|https://www.ifixit.com/Guide/How+To+Solder+and+Desolder+Connections/750|Information on how to solder|new_window=true][br] | | [br] |
|