/
Mi Mesa de Trabajo

Obtén acceso rápido a guías, piezas y respuestas para tus dispositivos

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unete
Iniciar sesión
Únete a la comunidad de reparación más grande del mundo
MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement

MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement

Andrew Optimus Goldheart

Andrew Optimus Goldheart y 3 otros contribuidores

Última actualización: February 18, 2020

Sin estimación
Moderado

Introducción

Ir al paso 1

Use this guide to replace a broken optical drive in your MacBook Pro 15" Unibody Mid 2012.

Qué necesitas

Partes

Herramientas

Ver más…

  1. MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement, Lower Case: paso 1, imagen 1 de 1

    • Remove the following ten screws securing the lower case to the upper case:

    • Three 13.5 mm (14.1 mm) Phillips screws.

    • Seven 3 mm Phillips screws.

    • When removing these screws, note how they come out at a slight angle. They must be reinstalled the same way.

    Editar

  2. MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement: paso 2, imagen 1 de 1

    • Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

    • Remove the lower case and set it aside.

    Editar

  3. MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement, Battery Connector: paso 3, imagen 1 de 2 MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement, Battery Connector: paso 3, imagen 2 de 2

    • For certain repairs (e.g. hard drive), disconnecting the battery connector is not necessary but is recommended as it prevents any accidental shorting of electronics on the motherboard. If you do not disconnect the battery connector, please be careful as parts of the motherboard might be electrified.

    • Use the edge of a spudger to pry the battery connector upwards from its socket on the logic board.

    • It is useful to pry upward on both short sides of the connector to "walk" it out of its socket.

    Editar

  4. MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement: paso 4, imagen 1 de 1

    • Bend the battery cable slightly away from its socket on the logic board so it does not accidentally connect itself while you work.

    Editar

  6. MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement, Optical Drive: paso 5, imagen 1 de 1

    • Disconnect the camera cable connector from its socket on the logic board.

    • Do not lift up on the cable as you disconnect it from the logic board. Pull the cable parallel to the face of the logic board.

    Editar

  7. MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement: paso 6, imagen 1 de 1

    • Use the flat end of a spudger to pry the AirPort/Bluetooth connector up from its socket on the logic board.

    Editar

  8. MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement: paso 7, imagen 1 de 1

    • Use the flat end of a spudger to pry the optical drive connector up from its socket on the logic board.

    Editar

  9. MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement: paso 8, imagen 1 de 2 MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement: paso 8, imagen 2 de 2

    • Remove following two screws:

    • Take care, as these screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments before proceeding.

    • One 8.6 mm Phillips screw

    • One 3.9 mm Phillips screw

    • Carefully rotate the AirPort/Bluetooth board housing (with AirPort/Antenna cables still attached) out of the lower case.

    Editar

  10. MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement: paso 9, imagen 1 de 1

    • Remove the three 3.5 mm T6 Torx screws securing the optical drive to the upper case.

    Editar

  11. MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement: paso 10, imagen 1 de 1

    • Lift the optical drive near its connector and pull it away from the upper case to remove it from the computer.

    Editar

  12. MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement, Optical Drive Cable: paso 11, imagen 1 de 2 MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement, Optical Drive Cable: paso 11, imagen 2 de 2

    • Pull the optical drive cable out of the optical drive.

    • Be sure to pull by the edges of the connector, not by the cable itself.

    • Remove the two black Phillips #0 screws securing the small metal mounting bracket. Transfer this bracket to your new optical drive or hard drive enclosure.

    Editar

  13. MacBook Pro 15" Unibody Mid 2012 Optical Drive Replacement, Optical Drive: paso 12, imagen 1 de 1

    • Optical drive remains.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

39 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Andrew Optimus Goldheart

Miembro Desde 10/17/09

508,631 Reputación

407 Guías creadas

Insignias: 44

+ 41 más insignias

Equipo

iFixit Miembro de iFixit

Staff

118 Miembros

19,418 Guías creadas

Un comentario

innerhalb von einer Stunde erledigt gewesen - Danke für die Anleitung!

Christian - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 22

Ultimos 30 días: 59

Todo El Tiempo: 36,296