/
Mi Mesa de Trabajo

Obtén acceso rápido a guías, piezas y respuestas para tus dispositivos

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unete
Iniciar sesión
Únete a la comunidad de reparación más grande del mundo
GD Midea FT30-3D Oscillation Mechanism Replacement

GD Midea FT30-3D Oscillation Mechanism Replacement

Alan Su

Alan Su y 5 otros contribuidores

Última actualización: May 1, 2021

10 - 15 minutos
Fácil
Fotos de acción
Mejor introducción

Introducción

Ir al paso 1

This guide will show you how to replace the oscillation mechanism.

Qué necesitas

Herramientas

iFixit gana una comisión si finalizas una compra usando estos enlaces.

  1. GD Midea FT30-3D Oscillation Mechanism Replacement, Fan Blades: paso 1, imagen 1 de 2 GD Midea FT30-3D Oscillation Mechanism Replacement, Fan Blades: paso 1, imagen 2 de 2

    • Release the 3 clips that attach the front fan guard to the rear fan guard.

    • Notice: The lower connecting bracket is NOT a clip. It acts as a mounting alignment bracket for the front fan guard.

    Traducir

  2. GD Midea FT30-3D Oscillation Mechanism Replacement: paso 2, imagen 1 de 1

    • Pull the front fan guard off.

    Traducir

  3. GD Midea FT30-3D Oscillation Mechanism Replacement: paso 3, imagen 1 de 2 GD Midea FT30-3D Oscillation Mechanism Replacement: paso 3, imagen 2 de 2

    • Remove the spinner from the center of the fan blade.

    Traducir

    So how do i take the spinner off the fan

    Martha Meza - Contestar

    H how do I take the spinner off the center of a fan I don't know how

    Martha Meza - Contestar

  4. GD Midea FT30-3D Oscillation Mechanism Replacement: paso 4, imagen 1 de 1

    • The fan blades should now be easy to lift up.

    • When reassembling the fan make sure the notches in the center of the fan blade line up with the protrusions in the motor's shaft.

    Traducir

  6. GD Midea FT30-3D Oscillation Mechanism Replacement, Oscillation Mechanism: paso 5, imagen 1 de 1

    • Remove the rear fan guard by taking off the plastic nut that holds the rear fan guard to the upper assembly.

    • The plastic nut needs to be twisted off; like a screw.

    Traducir

  7. GD Midea FT30-3D Oscillation Mechanism Replacement: paso 6, imagen 1 de 2 GD Midea FT30-3D Oscillation Mechanism Replacement: paso 6, imagen 2 de 2

    • Remove the screw at the center of the oscillator knob and remove the oscillator knob.

    • If the oscillator knob is clean and undamaged then the problem is with the oscillator. If the knob is damaged replace it and test your fan before proceeding forward in the guide.

    Traducir

  8. GD Midea FT30-3D Oscillation Mechanism Replacement: paso 7, imagen 1 de 1

    • Remove the front motor housing by removing 4 screws.

    Traducir

  9. GD Midea FT30-3D Oscillation Mechanism Replacement: paso 8, imagen 1 de 2 GD Midea FT30-3D Oscillation Mechanism Replacement: paso 8, imagen 2 de 2

    • The main motor housing can be taken off by removing a single screw at the back of the upper assembly.

    Traducir

  10. GD Midea FT30-3D Oscillation Mechanism Replacement: paso 9, imagen 1 de 1

    • There is a capacitor attached to the oscillator by a single screw. Once the screw is removed the capacitor should come off easily.

    Traducir

    the two wires of capacitors are connected where ?? please guide me.

    mohangmysore - Contestar

    The two wires are normally connected to the motors, start winding.

    james - Contestar

  11. GD Midea FT30-3D Oscillation Mechanism Replacement: paso 10, imagen 1 de 2 GD Midea FT30-3D Oscillation Mechanism Replacement: paso 10, imagen 2 de 2

    • Remove the screw that connects the oscillator to the rocker arm.

    • Push down on the rocker arm after removing the screw and turn it away from the oscillator.

    Traducir

  12. GD Midea FT30-3D Oscillation Mechanism Replacement: paso 11, imagen 1 de 1

    • The oscillator should now be easy to pull off.

    • Clean the oscillator and remove any jams. If the problem persists the oscillator is damaged and needs to be replaced.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

10 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Alan Su

Miembro Desde 10/03/12

810 Reputación

6 Guías creadas

Insignias: 12

+ 9 más insignias

Equipo

Cal Poly, Team 24-28, Regan Fall 2012 Miembro de Cal Poly, Team 24-28, Regan Fall 2012

CPSU-REGAN-F12S24G28

Miembros de 4

14 Guías creadas

2 comentarios

I bought a fan and two days later my grandson dropped it and it stopped turning. Its been stuck in one position for about two weeks. Finally I said I know someone on the internet is gonna no what is wrong and how to fix it. Thank you. I fixed my fan in about 10 minutes. The oscillating handle had just come lose from the screw. Everybody thinks I'm a genius. LOL! Super grandma strikes again!

kim - Contestar

Where do I locate a gearbox kit for a 30” polar aire fan model lfdj-30pbo. Thanks for what ever help you can give me

Eric Delatte - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 29

Todo El Tiempo: 14,328